sensitron semiconductor ? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? mur6030sw technical data data sheet m2616, rev. - mur6030sw ultrafast plastic rectifier features: ? utra-fast switching ? high current capability ? low reverse leakage current ? high surge current capability ? plastic material has ul flammability classification 94v-o mechanical data: ? case: molded plastic ? terminals: solder leads, solderable per mil-std-202, method 208 ? weight: 6 grams (approx.) ? marking: type number ? mounting position: any mechanical dimensions: in mm / inches 13 2 anode anode cathode to-247ad a option c option c is also available. to order specifically the option c, please add suffix ??c? to the part number: to order specifically the standard option, please add suffix ??s? to the part number. if there is no suffix to the part number, the part could come with either option.
sensitron semiconductor ? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? mur6030sw data sheet m2616, rev. ? maximum ratings: characteristics symbol condition max. units peak inverse voltage v rrm - 300 v max. average forward i o(av) 50hz sine wave 60 a max. peak one cycle non- repetitive surge current i fsm 50hz half sine wave 250 a electrical characteristics: characteristics symbol condition max. units @i f =60a, pulse, t j = 25 c 1.40 max. forward voltage drop v f @ i f =60a, pulse, t j = 125 c 1.30 v i r1 @v r = rated v r t j = 25 c 15 a max. reverse current i r2 @v r = rated v r t j = 125 c 2 ma max. reverse recovery time t rr i f =500ma, i r =1a,and i rm =250ma 60 ns * pulse width < 300 s, duty cycle < 2% thermal-mechanical specifications: characteristics symbol condition specification units max. junction temperature t j - -65 to +175 c max. storage temperature t stg - -65 to +175 c maximum thermal resistance junction to case r jc - 0.80 c/w transient thermal resistance at 1s z jc - 0.002 c/w approximate weight wt - 6 g case style to-247ad
sensitron semiconductor ? 221 west industry court deer park, ny 11729-4681 (631) 586-7600 fax (631) 242-9798 ? ? world wide web site - http://www.sensitron.com ? e-mail address - sales@sensitron.com ? mur6030sw data sheet m2616, rev. - disclaimer: 1- the information given herein, including the specifications and dimensions, is subject to change without prior not ice to imp rove product characteristics. before ordering, purchasers are advised to contact the sensitron semiconductor sales department for th e latest version of the datasheet(s). 2- in cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause duri ng operation of the user?s units according to the datasheet(s). sensitron semiconductor assumes no responsibility for any intellec tual property claims or any other problems that may result from applications of information, products or circuits described in the d atasheets. 4- in no event shall sensitron semiconductor be liable for any failure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet(s) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permissi on of sensitron semiconductor. 7- the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their applica tion will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or a ny third party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws a nd regulations.
|
